En poursuivant votre navigation, vous acceptez l'utilisation de cookies destinés à améliorer la performance de ce site et à vous proposer des services et contenus personnalisés.

X

Onglets principaux

Photo personnelle
Weisz-Patrault Daniel
CHERCHEUR - CHARGÉ DE RECHERCHE CNRS

Contact

Bureau : 3:10-11
Téléphone : +33169335805
Département/Laboratoire/Service : CA/DER/LAB/LMS

Bibliographie & travail en cours

Biographie: 

ACADEMIC POSITIONS

2014-present     Assistant Professor, CNRS, Solid Mechanics Laboratory (LMS) Ecole Polytechnique, Palaiseau, France

Mar-Apr 2014    Visiting Research Scholar, Institute of Applied Mechanics, University of Stuttgart, Germany

Apr-Aug 2013    Visiting Research Scholar, Institute of Mathematics and Physics, University of Weimar, Germany

2013-2014         Postdoctoral Research Associate, Navier Laboratory, Ecole des Ponts ParisTech, France

EDUCATION

2010-2012         PhD (≈ 2 years): Ecole des Ponts ParisTech, Navier Laboratory, France (Advisor: Alain Ehrlacher)

2009-2010         Master degree: Ecole des Ponts ParisTech, Mechanical engineering and Applied Mechanics, France

2006-2010         Engineering degree: Ecole des Ponts ParisTech, Mechanical engineering, France

2003-2006         Preparation, Lycée Henri IV, Paris, France

AWARDS

2018                  Jean Rist Medal (early career award from SF2M)

2014                  Ranked 1st at the recruitment contest of CNRS (section 9)

2013                  PhD prize of Paris-Est University, France

2013                  PhD prize of the Ecole des Ponts ParisTech

2008                  Finalist of the best scientific internship award, Ecole des Ponts ParisTech

SUPERVISION OF GRADUATE STUDENTS AND POSTDOCTORAL FELLOWS

Post-doctoral students (1)

2017-2018        Charles Francart, Funded by the French Alternative Energies and Atomic Energy Commission (CEA)

PhD students (2)

2016-2018        Anthony Janin, (joint with Prof A. Constantinescu) Funded by Safran Composite, France

2018-2020        Sofia Sakout (joint with Prof A. Ehrlacher), Funded by Paris-Est University, France

Master students (4)

2017                  Maxime Gantier, Funded by ArcelorMittal, France

2017                  Thomas Koedinger, Funded by Ecole Polytechnique, France

2016                  Joffrey Bluthé, Funded by ArcelorMittal, France

2014                  Kokou Adokanou, Funded by ArcelorMittal, France

Undergraduate students (1)

2018                  Jonas Aparicio, Funded by Ecole Polytechnique, France

ORGANISATION OF SCIENTIFIC MEETINGS

2014-present   Organizer of the “Graduate Research Seminar” at LMS, Ecole Polytechnique

                        Organizer of the international Jean Mandel Symposium

2018                Plenary lecture: G. Ravichandran (California Institute of Technology, California, USA)

2017                 Plenary lecture: T. Healey (Cornell University, USA)

2016                Plenary lecture: C. Daraio (ETH Zurich, Switzerland)

SCIENTIFIC COMMISIONS

2016-present Member of the Faculty Committee of Department of Mechanics, Ecole Polytechnique

2016-present Elected member of the Laboratory board of LMS, Ecole Polytechnique

2013-present Reviewer at (16 reviews): Journal of the Mechanics and Physics of Solids, International Journal of Solids and Structures, International Journal of Heat and Mass Transfer, International Journal of Thermal Sciences, Smart Materials and Structures, Measurements, Sensors, Mechanics & Industry, Journal of Mechanical Engineering Science, Metallurgical Research & Technology, Modelling and Simulation in Materials Science and Engineering

SCIENTIFIC SOCIETIES

2012-present   Member of the French Society of Materials and Metallurgy (SF2M)

Enseignement: 

Inverse methods, École Polytechnique, Engineering degree (3rd year), 30h/year.
Numerical methods, École Polytechnique, Master 2, MAGIS, 30h/year.
Fracture mechanics, École des Ponts ParisTech, Master 2, AMMS, 30h/year.

Recherche: 

Statistical information of microstructures
Thermo-metallurgical couplings
Transformation induced plastiticty
Forming processes
Fast numerical simulations
Real time inverse methods

Publications et Liens

Publications: 

Peer reviewed international papers (ref WoS)

[A1] Anthony Janin, Andrei Constantinescu, Daniel Weisz-Patrault, Robert Neviere, Mathieu Stackler, and William Albouy. Experimental methodology for behavior and failure characterization of adhesive joints under dynamic multiaxial loadings. Experimental Mechanics, 1-13 2018. .
[A2] Daniel Weisz-Patrault and Thomas Koedinger. Residual stress on the run out table accounting for multiphase transitions and transformation induced plasticity. Applied Mathematical Modelling, 60 :18–33, 2018.
[A3] DanielWeisz-Patrault. Nonlinear and multiphysic evaluation of residual stresses in coils. Applied Mathematical Modelling, 61 :141–166, 2018.
[A4] Daniel Weisz-Patrault. Multiphase model for transformation induced plasticity extended leblond’s model. Journal of the Mechanics and Physics of Solids, 106 :152–175, 2017.
[A5] Joffrey Bluthé, Daniel Weisz-Patrault, and Alain Ehrlacher. Energetic approach for a sliding inclusion accounting for plastic dissipation at the interface, application to phase nucleation. International Journal of Solids and Structures, 121 :163–173, 2017.
[A6] D Weisz-Patrault and A Ehrlacher. Imposed curvature of an elastic-plastic strip : application to simulation of coils. Mechanics & Industry, 18(2) :218–228, 2017.
[A7] Daniel Weisz-Patrault. Coupled heat conduction and multiphase change problem accounting for thermal contact resistance. International Journal of Heat and Mass Transfer, 104 :595–606, 2017.
[A8] Daniel Weisz-Patrault, Alain Ehrlacher, and Nicolas Legrand. Non-linear simulation of coiling accounting for roughness of contacts and multiplicative elastic-plastic behavior. International Journal of Solids and Structures, 94 :1–20, 2016.
[A9] Daniel Weisz-Patrault, Laurent Maurin, Nicolas Legrand, Anas Ben Salem, and Abdelkebir Ait Bengrir. Experimental evaluation of contact stress during cold rolling process with optical fiber bragg gratings sensors measurements and fast inverse method. Journal of Materials Processing Technology, 223 :105–123, 2015.
[A10] Daniel Weisz-Patrault. Inverse cauchy method with conformal mapping : application to latent flatness defect detection during rolling process. International Journal of Solids and Structures, 56 :175–193, 2015.
[A11] Daniel Weisz-Patrault, Sebastian Bock, and Klaus Gürlebeck. Three-dimensional elasticity based on quaternion-valued potentials. International Journal of Solids and Structures, 51(19) :3422–3430, 2014.
[A12] Daniel Weisz-Patrault, Alain Ehrlacher, and Nicolas Legrand. Temperature and heat flux fast estimation during rolling process. International Journal of Thermal Sciences, 75 :1–20, 2014.
[A13] Daniel Weisz-Patrault, Alain Ehrlacher, and Nicolas Legrand. Evaluation of contact stress during rolling process, by three dimensional analytical inverse method. International Journal of Solids and Structures, 50(20) :3319–3331, 2013.
[A14] Daniel Weisz-Patrault, Alain Ehrlacher, and Nicolas Legrand. Analytical inverse solution for coupled thermoelastic problem for the evaluation of contact stress during steel strip rolling. Applied Mathematical Modelling, 37(4) :2212–2229, 2013.
[A15] Daniel Weisz-Patrault, Alain Ehrlacher, and Nicolas Legrand. Evaluation of temperature field and heat flux by inverse analysis during steel strip rolling. International Journal of Heat and Mass Transfer, 55(4) :629–641, 2012.
[A16] DanielWeisz-Patrault, Alain Ehrlacher, and Nicolas Legrand. A new sensor for the evaluation of contact stress by inverse analysis during steel strip rolling. Journal of Materials Processing Technology, 211(9) :1500–1509, 2011.

Full length peer reviewed proceedings (ref WoS)

[B1] Anthony Janin, Andrei Constantinescu, DanielWeisz-Patrault, Robert Neviere, Mathieu Stackler, and William Albouy. An experimental technique for the characterization of adhesive joints under dynamic multiaxial loadings. Procedia Engineering, 197 :52–59, 2017.
[B2] Daniel Weisz-Patrault. Energetic approach coupled with analytic solution for the evaluation of residual stress. In Congrès Français de Mécanique. AFM, Association Française de Mécanique, 2017.
[B3] Daniel Weisz-Patrault. Experimental validation of the multiphase extended leblond’s model. AIP Conference Proceedings, 1896(1) :160017, 2017.
[B4] Daniel Weisz-Patrault and Alain Ehrlacher. Curvature of an elasto-plastic strip at finite strains : application to fast simulation of coils. In Congrès Français de Mécanique. AFM, Association Française de Mécanique, 2015.
[B5] Daniel Weisz-Patrault, Alain Ehrlacher, Nicolas Legrand, and Eliette Mathey. Non-linear numerical simulation of coiling by elastic finite strain model. Key Engineering Materials, 651 :1060–1065, 2015.
[B6] Nicolas Legrand, Daniel Weisz-Patrault, Jaroslav Horsk`y, Tomáš Luks, Nathalie Labbe, Michel Picard, and Alain Ehrlacher. Characterization of roll bite heat transfers in hot steel strip rolling and their influence on roll thermal fatigue degradation. Key Engineering Materials, 554 :1555–1569, 2013.
[B7] Nicolas Legrand, Nathalie Labbe, Daniel Weisz-Patrault, Alain Ehrlacher, Tomasz Luks, and Jaroslav Horsk`y. Analysis of roll gap heat transfers in hot steel strip rolling through roll temperature sensors and heat transfer models. Key Engineering Materials, 504 :1043–1048, 2012.
[B8] Daniel Weisz-Patrault, Alain Ehrlacher, Nicolas Legrand, Nathalie Labbe, Jaroslav Horsk`y, and Tomáš Luks. Experimental study of interfacial heat flux and surface temperature by inverse analysis with thermocouple

Publications HAL: 
FALSE

Hal

Publications HAL: 

{{ type="webpage_from_hal" url="http://hal.univ-grenoble-alpes.fr/Public/afficheRequetePubli.php?auteur_exp=boris,morel&CB_auteur=oui&CB_titre=oui&CB_article=oui&langue=Francais&tri_exp=annee_publi&tri_exp2=typdoc&tri_exp3=date_publi&ordre_aff=TA&Fen=Aff&css=../css/VisuRubriqueEncadre.css}}